View MKP37806_4905835.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

METALLIZED POLYPROPYLENE FILM BCcomponents Film Capacitors AC AND PULSE CAPACITOR
Doc. No: HQN-384-17/102 Rev. : W Iss. Date: 2006-10-16 Page 1 of 19
MKP 378 MKP/MKP378
MKP AND MKP/MKP RADIAL POTTED TYPE
VISHAY BCcomponents
MKP 378 MKP/MKP 378 AC and Pulse metallized polypropylene film capacitor
File under TPD sheet 190, HQN-384-17/102
HQN-384-17/102 MKP378-MKPMKP378 prod spec Eng.doc
METALLIZED POLYPROPYLENE FILM BCcomponents Film Capacitors AC AND PULSE CAPACITOR
Doc. No: HQN-384-17/102 Rev. : W Iss. Date: 2006-10-16 Page 2 of 19
MKP 378 MKP/MKP378
MKP AND MKP/MKP RADIAL POTTED TYPE
Pb
Pb-free
AC and Pulse Metallized Polypropylene Film Capacitors MKP and MKP/MKP Radial Potted Type
APPLICATIONS Where steep pulses occur e.g. SMPS (switch mode power supplies). Motor control circuits. S-correction. It is not advised to use these products as resonance capacitors in fly-back applications MARKING C-value; tolerance; rated voltage; manufacturer's type designation; code for dielectric material; manufacturer's emblem; code for factory of origin; year and week of manufacture DIELECTRIC Polypropylene film ELECTRODES Metallized film ENCAPSULATION Flame retardant plastic case and epoxy resin (UL-class 94 V-0) CONSTRUCTION Internal serial construction LEADS Tinned wire
168x12(halfpage)
l
w
h
lt P0.4 Odt
CBB817 CLIMATIC CATEGORY 55/085/56 RATED (DC) TEMPERATURE 85 C RATED (AC) TEMPERATURE 70 C MAXIMUM APPLICATION TEMPERATURE 85 C REFERENCE SPECIFICATIONS IEC 60384-17 PERFORMANCE GRADE Grade 1 (long life) STABILITY GRADE Pitch 15 mm: grade 2 Pitch 22.5 and 27.5 mm: grade 1 FEATURES 15.0 to 27.5 mm pitch. Supplied loose in box, taped on reel RoHS compliant DETAIL INSPECTION AND TEST REQUIREMENTS See Technical Product Documentation sheet 191.
e3
CAPACITANCE RANGE (E24 SERIES) MKP: 0.18 to 3.3 F MKP/MKP: 0.003 to 0.68 F CAPACITANCE TOLERANCE 5% RATED (DC)VOLTAGE MKP: 250V; 400V MKP/MKP: 630V; 1000V; 1600V; 2000V RATED (AC) VOLTAGE MKP: 160V; 200V MKP/MKP: 300V; 400V; 500V; 600V RATED PEAK-TO-PEAK VOLTAGE MKP: 450V; 560V MKP/MKP: 850V; 1130V; 1400V; 1700V
HQN-384-17/102 MKP378-MKPMKP378 prod spec Eng.doc
METALLIZED POLYPROPYLENE FILM BCcomponents Film Capacitors AC AND PULSE CAPACITOR
Doc. No: HQN-384-17/102 Rev. : W Iss. Date: 2006-10-16 Page 3 of 19
MKP 378 MKP/MKP378
MKP AND MKP/MKP RADIAL POTTED TYPE
COMPOSITION OF CATALOGUE NUMBER TYPE AND PITCHES 15.0 mm 378 22.5 mm 27.5 mm CAPACITANCE (numerically) MULTIPLIER (nF) 0.1 1 10 2 3 4
Example: 104= 10 x 10 = 100 nF
2222
378
XX XX
XX XX
X X
BFC2(*) 378
(*) Use this part number for those with access to the Vishay SAP system and Partners websites within the Americas
TYPE 378 MKP/MKP
PACKAGING loose in box loose in box loose in box Taped on reel loose in box Taped on reel
LEAD CONFIGURATION lead length 3.5 0.3 mm lead length 3.5 0.3 mm lead length 5.0 1.0 mm H = 18.5 mm; P0 = 12.7 mm lead length 5.0 1.0 mm H = 18.5 mm; P0 = 12.7 mm
PREFERRED TYPES C-TOL 5% 250V 44 42 45 400V 54 52 55 630V 64 1000V 74 1600V 84 82 85 2000V 94 92 95
378 MKP 378 MKP/MKP
5%
5%
ON REQUEST 62 72 65 75
Voltage (V DC) 630
C (F) 0.056 0.068 0.012 0.013 0.015 0.016 0.018
1000
AVAILABLE VERSIONS 378 MKP/MKP ON SPECIAL REQUEST Pitch = 15.0 0.4 mm; w x h x l = 8.5mm x 15.0mm x 17.5 mm Loose in box; SPQ=1000 lead length 3.5 0.3 mm lead length 5.0 1.0 mm 2222 378 90042 2222 378 90043 2222 378 90046 2222 378 90047 2222 378 90051 2222 378 90052 2222 378 90055 2222 378 90056 2222 378 90059 2222 378 90061 2222 378 90064 2222 378 90065 2222 378 90068 2222 378 90069
Taped on reel; SPQ=650 H = 18.5 mm; P0 = 12.7 mm 2222 378 90044 2222 378 90048 2222 378 90053 2222 378 90057 2222 378 90062 2222 378 90066 2222 378 90071
HQN-384-17/102 MKP378-MKPMKP378 prod spec Eng.doc
METALLIZED POLYPROPYLENE FILM BCcomponents Film Capacitors AC AND PULSE CAPACITOR
Doc. No: HQN-384-17/102 Rev. : W Iss. Date: 2006-10-16 Page 4 of 19
MKP 378 MKP/MKP378
MKP AND MKP/MKP RADIAL POTTED TYPE
Specific reference data MKP (250VDC) DESCRIPTION Tangent of loss angle: C 0.43 F 0.47 F C 0.62 F 0.68 F C 0.82 F 0.91 F C 1.0 F 1.1 F C 3.3 F Rated voltage pulse slope (dU/dt)R : Pitch = 22.5 mm Pitch = 27.5 mm Pitch = 27.5 mm R between leads, for C 1 F at 100 V; 1 minute RC between leads, for C > 1 F at 100 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC)voltage (cut off current 10 mA); rise time 100 V/s: Withstanding (DC) voltage between leads and case URdc = 250 V; URac = 160 V; Up-p=450V C (F) DIMENSIONS wxhxl (mm) MASS (g) CATALOGUE NUMBER 2222 378 ...AND PACKAGING LOOSE IN BOX Lt= 5.01.0 mm Last 5 digits Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 0.33 7.0x16.5x26.0 2.9 0.36 0.39 0.43 0.47 8.5x18.0x26.0 3.8 0.51 0.56 0.62 0.68 10.0x19.5x26.0 6.8 0.75 0.82 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 0.91 1.0 11.0x21.0x31.0 7.4 1.1 1.2 1.3 1.5 1.6 1.8 2.0 2.2 2.4 2.7 3.0 3.3 42334 42364 42394 42434 42474 42514 42564 42624 42684 42754 42824 42914 42105 42115 42125 42135 42155 42165 42185 42205 42225 42245 42275 42305 42335 all leads SPQ SPQ REEL at 10 kHz 15 x 10-4 15 x 10 15 x 10
-4 -4
VALUE at 100 kHz 45 x 10-4 55 x 10-4 60 x 10-4 90 x 10-4 200 x 10-4
20 x 10-4 20 x 10
-4
90 V/s 60 V/s (w < 15mm) 30 V/s (w 15mm) > 100 000 M > 100 000 s > 220 V 400 V; 1 minute 500 V; 1 minute
200
550
200
450
200
350
100
13.0x23.0x31.0
9.2
100
15.0x25.0x31.0
12.3
100
18.0x28.0x31.0
16.1
100
HQN-384-17/102 MKP378-MKPMKP378 prod spec Eng.doc
METALLIZED POLYPROPYLENE FILM BCcomponents Film Capacitors AC AND PULSE CAPACITOR
Doc. No: HQN-384-17/102 Rev. : W Iss. Date: 2006-10-16 Page 5 of 19
MKP 378 MKP/MKP378
MKP AND MKP/MKP RADIAL POTTED TYPE
Specific reference data MKP (400VDC) DESCRIPTION Tangent of loss angle: C 0.24 F 0.27 F C 0.36 F 0.39 F C 0.51 F 0.56 F C 0.68 F 0.75 F C 1.0 F 1.1 F C 2.0 F Rated voltage pulse slope (dU/dt)R : Pitch = 22.5 mm Pitch = 27.5 mm Pitch = 27.5 mm R between leads, for C 1 F at 100V; 1 minute RC between leads, for C > 1 F at 100V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC)voltage (cut off current 10 mA); rise time 100 V/s: Withstanding (DC) voltage between leads and case at 10 kHz 10 x 10-4 10 x 10 10 x 10 15 x 10
-4 -4
VALUE at 100 kHz 30 x 10-4 35 x 10-4 40 x 10-4 50 x 10-4 70 x 10-4 150 x 10-4
15 x 10-4
-4 -4
15 x 10
100 V/s 70 V/s (w < 15mm) 35 V/s (w 15mm) > 100 000 M > 100 000 s > 250 V 640 V; 1 minute 800 V; 1 minute
URdc = 400 V; URac = 200 V; Up-p=560V C (F) DIMENSIONS wxhxl (mm) MASS (g) CATALOGUE NUMBER 2222 378 ...AND PACKAGING LOOSE IN BOX Lt= 5.01.0 mm Last 5 digits Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 0.18 7.0x16.5x26.0 2.9 0.20 0.22 0.24 0.27 8.5x18.0x26.0 3.8 0.30 0.33 0.36 0.39 10.0x19.5x26.0 6.8 0.43 0.47 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 0.51 0.56 11.0x21.0x31.0 7.4 0.62 0.68 0.75 0.82 13.0x23.0x31.0 9.2 0.91 1.0 1.1 15.0x25.0x31.0 12.3 1.2 1.3 1.5 1.6 1.8 2.0 52184 52204 52224 52244 52274 52304 52334 52364 52394 52434 52474 52514 52564 52624 52684 52754 52824 52914 52105 52115 52125 52135 52155 52165 52185 52205 all leads SPQ SPQ REEL
200
550
200
450
200
350
100
100
100
18.0x28.0x31.0
16.1
100
HQN-384-17/102 MKP378-MKPMKP378 prod spec Eng.doc
METALLIZED POLYPROPYLENE FILM BCcomponents Film Capacitors AC AND PULSE CAPACITOR
Doc. No: HQN-384-17/102 Rev. : W Iss. Date: 2006-10-16 Page 6 of 19
MKP 378 MKP/MKP378
MKP AND MKP/MKP RADIAL POTTED TYPE
Specific reference data MKP/MKP (630VDC) DESCRIPTION Tangent of loss angle: C 0.18 F 0.20 F C 0.30 F 0.33 F C 0.39 F 0.43 F C 0.51 F C > 0.51 F Rated voltage pulse slope (dU/dt)R : Pitch = 15 mm Pitch = 22.5 mm Pitch = 27.5 mm Pitch = 27.5 mm R between leads, for C 1 F at 500 V; 1 minute R between leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC)voltage (cut off current 10 mA); rise time 100 V/s: Withstanding (DC) voltage between leads and case URdc = 630 V; URac = 300 V; Up-p=850V C (F) DIMENSIONS wxhxl (mm) MASS (g) CATALOGUE NUMBER 2222 378 ...AND PACKAGING LOOSE IN BOX Lt= 3.50.3 mm Last 5 digits Pitch = 15.0 0.4 mm; dt = 0.60 0.06 mm 0.015 0.016 0.018 0.020 0.022 0.024 0.027 0.030 0.033 64153 64163 64183 64203 64223 64243 64273 64303 64333 64363 64393 64433 64473 64513 64563 64623 64683 64753 64823 64913 64104 64114 64124 64134 64154 64164 64184 all leads SPQ SPQ REEL at 10 kHz 8 x 10-4 10 x 10 10 x 10
-4 -4
VALUE at 100 kHz 15 x 10-4 25 x 10-4 30 x 10-4 40 x 10-4 45 x 10-4
10 x 10-4 10 x 10
-4
500 V/s 370 V/s 230 V/s (w < 15mm) 120 V/s (w 15mm) > 100 000 M > 100 000 M > 400 V 1008 V; 1 minute 2840 V; 1 minute
5.0x11.0x17.5
1.0
1000
1100
6.0x12.0x17.5
1.4
1000
900
Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.036 7.0x13.5x17.5 1.8 0.039 0.043 0.047 8.5x15.0x17.5 2.4 0.051 Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 0.056 6.0x15.5x26.0 2.4 0.062 0.068 0.075 7.0x16.5x26.0 2.9 0.082 0.091 0.10 0.11 8.5x18.0x26.0 3.8 0.12 0.13 0.15 10.0x19.5x26.0 6.8 0.16 0.18 1000 800
1000
650
300
600
200
550
200
450
200
350
HQN-384-17/102 MKP378-MKPMKP378 prod spec Eng.doc
METALLIZED POLYPROPYLENE FILM BCcomponents Film Capacitors AC AND PULSE CAPACITOR
Doc. No: HQN-384-17/102 Rev. : W Iss. Date: 2006-10-16 Page 7 of 19
MKP 378 MKP/MKP378
MKP AND MKP/MKP RADIAL POTTED TYPE
C (F)
DIMENSIONS wxhxl (mm)
MASS (g)
CATALOGUE NUMBER 2222 378 ...AND PACKAGING LOOSE IN BOX Lt= 3.50.3 mm Last 5 digits all leads SPQ
REEL SPQ
Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 0.20 0.22 11.0x21.0x31.0 7.4 0.24 0.27 0.30 0.33 13.0x23.0x31.0 9.2 0.36 0.39 0.43 15.0x25.0x31.0 12.3 0.47 0.51 0.56 0.62 0.68
18.0x28.0x31.0
16.1
64204 64224 64244 64274 64304 64334 64364 64394 64434 64474 64514 64564 64624 64684
100
100
100
100
Specific reference data MKP/MKP (1000VDC) DESCRIPTION Tangent of loss angle: C 0.051 F 0.056 F C 0.22 F Rated voltage pulse slope (dU/dt)R : Pitch = 15 mm Pitch = 22.5 mm Pitch = 27.5 mm Pitch = 27.5 mm R between leads, for C 1 F at 500 V; 1 minute R between leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC)voltage (cut off current 10 mA); rise time 100 V/s: Withstanding (DC) voltage between leads and case URdc = 1000 V; URac = 400 V; Up-p=1130V C (F) DIMENSIONS wxhxl (mm) MASS (g) CATALOGUE NUMBER 2222 378 ...AND PACKAGING LOOSE IN BOX Lt= 3.50.3 mm Last 5 digits Pitch = 15.0 0.4 mm; dt = 0.60 0.06 mm 0.0030 0.0033 0.0036 0.0039 0.0043 0.0047 0.0051 0.0056 0.0062 0.0068 0.0075 74302 74332 74362 74392 74432 74472 74512 74562 74622 74682 74752 all leads SPQ SPQ REEL at 10 kHz 6 x 10-4 8 x 10
-4
VALUE at 100 kHz 15 x 10-4 20 x 10-4
1300 V/s 1200 V/s 600 V/s (w < 15mm) 300 V/s (w 15mm) > 100 000 M > 100 000 M > 500 V 1600 V; 1 minute 2840 V; 1 minute
5.0x11.0x17.5
1.0
1000
1100
HQN-384-17/102 MKP378-MKPMKP378 prod spec Eng.doc
METALLIZED POLYPROPYLENE FILM BCcomponents Film Capacitors AC AND PULSE CAPACITOR
Doc. No: HQN-384-17/102 Rev. : W Iss. Date: 2006-10-16 Page 8 of 19
MKP 378 MKP/MKP378
MKP AND MKP/MKP RADIAL POTTED TYPE
C (F)
DIMENSIONS wxhxl (mm)
MASS (g)
CATALOGUE NUMBER 2222 378 ...AND PACKAGING LOOSE IN BOX Lt= 3.50.3 mm Last 5 digits all leads SPQ
REEL SPQ
0.0082 0.0091 6.0x12.0x17.5 1.4 0.010 0.011 Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 0.012 0.013 6.0x15.5x26.0 2.4 0.015 0.016 0.018 0.020 7.0x16.5x26.0 2.9 0.022 0.024 0.027 0.030 8.5x18.0x26.0 3.8 0.033 0.036 0.039 0.043 10.0x19.5x26.0 6.8 0.047 0.051 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 0.056 0.062 11.0x21.0x31.0 7.4 0.068 0.075 0.082 0.091 0.10 0.11 0.12 0.13 0.15 0.16 0.18 0.20 0.22
74822 74912 74103 74113 74123 74133 74153 74163 74183 74203 74223 74243 74273 74303 74333 74363 74393 74433 74473 74513 74563 74623 74683 74753 74823 74913 74104 74114 74124 74134 74154 74164 74184 74204 74224
1000
900
300
600
200
550
200
450
200
350
100
13.0x23.0x31.0
9.2
100
15.0x25.0x31.0
12.3
100
18.0x28.0x31.0
16.1
100
HQN-384-17/102 MKP378-MKPMKP378 prod spec Eng.doc
METALLIZED POLYPROPYLENE FILM BCcomponents Film Capacitors AC AND PULSE CAPACITOR
Doc. No: HQN-384-17/102 Rev. : W Iss. Date: 2006-10-16 Page 9 of 19
MKP 378 MKP/MKP378
MKP AND MKP/MKP RADIAL POTTED TYPE
Specific reference data MKP/MKP (1600VDC) DESCRIPTION Tangent of loss angle: C 0.022F 0.024 F C 0.1 F Rated voltage pulse slope (dU/dt)R : Pitch = 22.5 mm Pitch = 27.5 mm Pitch = 27.5 mm R between leads, for C 1 F at 500 V; 1 minute R between leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC)voltage (cut off current 10 mA); rise time 100 V/s: Withstanding (DC) voltage between leads and case URdc = 1600 V; URac = 500 V; Up-p=1400V C (F) DIMENSIONS wxhxl (mm) MASS (g) CATALOGUE NUMBER 2222 378 ...AND PACKAGING LOOSE IN BOX Lt= 3.50.3 mm Last 5 digits Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 0.0056 6.0x15.5x26.0 2.4 0.0062 0.0068 0.0075 0.0082 7.0x16.5x26.0 2.9 0.0091 0.010 0.011 0.012 8.5x18.0x26.0 3.8 0.013 0.015 0.016 0.018 10.0x19.5x26.0 6.8 0.020 0.022 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 0.024 0.027 11.0x21.0x31.0 7.4 0.030 0.033 0.036 0.039 0.043 0.047 0.051 0.056 0.062 0.068 0.075 0.082 0.091 0.10 84562 84622 84682 84752 84822 84912 84103 84113 84123 84133 84153 84163 84183 84203 84223 84243 84273 84303 84333 84363 84393 84433 84473 84513 84563 84623 84683 84753 84823 84913 84104 all leads SPQ SPQ REEL at 10 kHz 5 x 10-4 6 x 10
-4
VALUE at 100 kHz 10 x 10-4 15 x 10-4
1600 V/s 900 V/s (w < 15mm) 450 V/s (w 15mm) > 100 000 M > 100 000 M > 600 V 2560 V; 1 minute 2840 V; 1 minute
300
600
200
550
200
450
200
350
100
13.0x23.0x31.0
9.2
100
15.0x25.0x31.0
12.3
100
18.0x28.0x31.0
16.1
100
HQN-384-17/102 MKP378-MKPMKP378 prod spec Eng.doc
METALLIZED POLYPROPYLENE FILM BCcomponents Film Capacitors AC AND PULSE CAPACITOR
Doc. No: HQN-384-17/102 Rev. : W Iss. Date: 2006-10-16 Page 10 of 19
MKP 378 MKP/MKP378
MKP AND MKP/MKP RADIAL POTTED TYPE
Specific reference data MKP/MKP (2000VDC) DESCRIPTION Tangent of loss angle: C 0.051F Rated voltage pulse slope (dU/dt)R : Pitch = 22.5 mm Pitch = 27.5 mm Pitch = 27.5 mm R between leads, for C 1 F at 500 V; 1 minute R between leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC)voltage (cut off current 10 mA); rise time 100 V/s: Withstanding (DC) voltage between leads and case URdc = 2000 V; URac = 600 V; Up-p=1700V C (F) DIMENSIONS wxhxl (mm) MASS (g) CATALOGUE NUMBER 2222 378 ...AND PACKAGING LOOSE IN BOX Lt= 3.50.3 mm Last 5 digits Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 0.0033 6.0x15.5x26.0 2.4 0.0036 0.0039 0.0043 7.0x16.5x26.0 2.9 0.0047 0.0051 0.0056 0.0062 8.5x18.0x26.0 3.8 0.0068 0.0075 0.0082 0.0091 0.010 10.0x19.5x26.0 6.8 0.011 0.012 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 0.013 0.015 11.0x21.0x31.0 7.4 0.016 0.018 0.020 0.022 0.024 0.027 0.030 0.033 0.036 0.039 0.043 0.047 0.051 94332 94362 94392 94432 94472 94512 94562 94622 94682 94752 94822 94912 94103 94113 94123 94133 94153 94163 94183 94203 94223 94243 94273 94303 94333 94363 94393 94433 94473 94513 all leads SPQ SPQ REEL at 10 kHz 5 x 10-4 VALUE at 100 kHz 10 x 10-4
2000 V/s 1200 V/s (w < 15mm) 600 V/s (w 15mm) > 100 000 M > 100 000 M > 600 V 3200 V; 1 minute 2840 V; 1 minute
300
600
200
550
200
450
200
350
100
13.0x23.0x31.0
9.2
100
15.0x25.0x31.0
12.3
100
18.0x28.0x31.0
16.1
100
HQN-384-17/102 MKP378-MKPMKP378 prod spec Eng.doc
METALLIZED POLYPROPYLENE FILM BCcomponents Film Capacitors AC AND PULSE CAPACITOR
Doc. No: HQN-384-17/102 Rev. : W Iss. Date: 2006-10-16 Page 11 of 19
MKP 378 MKP/MKP378
MKP AND MKP/MKP RADIAL POTTED TYPE
CONSTRUCTION Description * Low-inductive wound cell of metallized polypropylene (PP) film, potted with epoxy resin in a flame-retardant polypropylene case * Radial leads, solder-coated: * Small stand-off pips allow removal of solder flux etc. during cleaning of the printed-circuit board.
144x12(halfpage)
Mounting NORMAL USE The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting in printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to Type detail specification "HQN-384-01/102, Packaging information". SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: * For pitches of15 mm capacitors shall be mechanically fixed by the leads * For larger pitches the capacitors shall be mounted in the same way and the body clamped
MKP metallised polypropylene film connecting wire
CBA403
1 SECTION
metal spray layer
SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD The maximum length and width of film capacitors is shown in Figure: * Eccentricity as in Figure. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. * Product height with seating plane as given by "IEC 60717" as reference: hmax h +0.3 mm
CBA403 Construction: MKP 250-400V versions; 160-200 V (AC)
144x12(halfpage)
2 SECTIONS
metal spray layer
144x12(halfpage) bmax = b + 0.3 mm eccentricity
MKP metallised polypropylene film connecting wire
CBA312
lmax = l + 0.3 mm
CBA116
CBA312 Construction: MKP/MKP 630-2000V versions; 300-600 V (AC)
CBA116
RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply to an ambient temperature of 23 1 C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 2%. For reference testing, a conditioning period shall be applied over 96 4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%.
HQN-384-17/102 MKP378-MKPMKP378 prod spec Eng.doc
METALLIZED POLYPROPYLENE FILM BCcomponents Film Capacitors AC AND PULSE CAPACITOR
Doc. No: HQN-384-17/102 Rev. : W Iss. Date: 2006-10-16 Page 12 of 19
MKP 378 MKP/MKP378
MKP AND MKP/MKP RADIAL POTTED TYPE
CHARACTERISTICS Capacitance
2
C/C (%)
max. typical min.
Impedance
10 2
0
10
Impedance ()
0
1 kHz
-1 10
100 nF
3.3 nF 10 nF
-2
10 -2
3.3 F
1.0 F
-40
0
40
Tamb (C) 80
-3 10 4 10
10
5
10
6
10
7 f (Hz) 8 10
CBB828 Max RMS voltage (sinewave) as a function of temperature
1.2
factor
CBB829
1.0
0.8
0.6
0.4
0.2
0.0 -60
-40
-20
0
20
40
Tamb (C) 80
CBB960 Maw RMS voltage and AC current (sinewave)
10 3 10 3
AC voltage (V)
10
2
nF 22 nF 47 0 nF F 10 70 n 4
AC voltage (V)
10
2
nF F 4.7 0 n F 1n 47 nF 0F 10 0 n 22
Tamb 70 C, 630 VDC 10 1 10 3 10 4 10 5 10 6 f (Hz) 10 7 10 1 3 10
Tamb 70 C,1000 VDC 10 4 10 5 10 6 f (Hz) 10 7
CBB824
CBB825
HQN-384-17/102 MKP378-MKPMKP378 prod spec Eng.doc
METALLIZED POLYPROPYLENE FILM BCcomponents Film Capacitors AC AND PULSE CAPACITOR
Doc. No: HQN-384-17/102 Rev. : W Iss. Date: 2006-10-16 Page 13 of 19
MKP 378 MKP/MKP378
MKP AND MKP/MKP RADIAL POTTED TYPE
10
3
10
3
AC voltage (V)
AC voltage (V)
nF 4.7 0 nFF 1 2n F 2 7n 4
nF 10 nF 22 7 nF F 4 0n 10
10
2
10
2
Tamb 70 C, 1600 VDC 10 1 10 3 10 4 10 5 10 6 f (Hz) 10 7 10 1 10 3
Tamb 70 C, 2000 VDC 10 4 10 5 10 6 f (Hz) 10 7
CBB826
CBB827
Maximum RMS current (sinewave) as a function of frequency The maximum RMS current is defined by Iac = x C x Uac. Uac. is the maximum AC voltage depending on the ambient temperature in the curves "Max RMS voltage and AC current as a function of frequency" Tangent of loss angle Insulation resistance
10 3
1. 2000V versions 1600V version, C 22 nF 2. 1600V version, C 24 nF 1000V version, C 51 nF 630V version, C 180 nF 3. 1000V version, C 56 nF 4. 630V version, 200 nF C 390 nF 5. 630V version, 390 nF < C 510 nF 6. 630V version, C > 510 nF
dissipation factor (x 10-4)
6 5 4 3 2 1
10
RC (s)
6
10
2
10
10 1
5
10
0 10 2 10 3 10 4 10 5 6 10 f (Hz) 10 7
10
4 0 20 40 60 80 Tamb (C)100
CBB959
CBB840
HQN-384-17/102 MKP378-MKPMKP378 prod spec Eng.doc
METALLIZED POLYPROPYLENE FILM BCcomponents Film Capacitors AC AND PULSE CAPACITOR
Doc. No: HQN-384-17/102 Rev. : W Iss. Date: 2006-10-16 Page 14 of 19
MKP 378 MKP/MKP378
MKP AND MKP/MKP RADIAL POTTED TYPE
Maximum allowed component temperature rise (T) as a function of the ambient temperature (Tamb)
12
DT (C)
8 4 0 -60 -20 20 60 Tamb (C) 100
CBB961
HEAT CONDUCTIVITY (G) AS A FUNCTION OF (ORIGINAL) PITCH AND CAPACITOR BODY THICKNESS IN mW/C wmax (mm) Pitch 15 mm 4.0 5.0 6.0 7.0 8.5 10.0 11.0 13.0 15.0 18.0 10 11 12 16 18 Heat conductivity (mW/C) Pitch 22.5 mm 19 21 25 28 Pitch 27.5 mm 36 42 48 57
-
POWER DISSIPATION AND MAXIMUM COMPONENT TEMPERATURE RISE The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free ambient temperature. The power dissipation can be calculated according Type detail specification "HQN-384-01/101: Technical information film capacitors The component temperature rise (T) can be measured (see Section "Measuring the component temperature" for more details) or calculated by T = P/G: * T = component temperature rise (C) * P = power dissipation of the component (mW) * G = heat conductivity of the component (mW/C)
HQN-384-17/102 MKP378-MKPMKP378 prod spec Eng.doc
METALLIZED POLYPROPYLENE FILM BCcomponents Film Capacitors AC AND PULSE CAPACITOR
Doc. No: HQN-384-17/102 Rev. : W Iss. Date: 2006-10-16 Page 15 of 19
MKP 378 MKP/MKP378
MKP AND MKP/MKP RADIAL POTTED TYPE
MEASURING THE COMPONENT TEMPERATURE A thermocouple must be attached to the capacitor body as in:
144x12(halfpage) thermocouple
CBA758
CBA758 The temperature is measured in unloaded (Tamb) and maximum loaded condition (Tc). The temperature rise is given by T =Tc - Tamb. To avoid radiation or convection, the capacitor should be tested in a wind-free box.
APPLICATION NOTE AND LIMITING CONDITIONS These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc) 2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum Up-p to avoid the ionisation inception level 3. The voltage peak slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URdc and divided by the applied voltage. For all other pulses following equation must be fulfilled:
dU dU 2x x dt < U Rdc x dt dt rated 0
T
2
4. 5. 6.
T is the pulse duration The rated voltage pulse slope is valid for ambient temperatures up to 70 C. For higher temperatures a derating factor of 3% per K shall be applied The maximum component surface temperature rise must be lower than the limits (see figure max allowed component temp rise) Since in circuits used at voltages over 280V peak-to-peak the risk for an intrinsically active flammability after a capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values mentioned in the table: "Heat conductivity" When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with an impedance to the mains the applicant must guarantee that the following conditions are fulfilled in any case (spikes and surge voltages from the mains included).
VOLTAGE CONDITIONS FOR 6 ABOVE ALLOWED VOLTAGES Maximum continuous RMS voltage Maximum temperature RMS-overvoltage (<24 hours) Maximum peak voltage (Vo-p) (<2s) Tamb 70 C URac 1.25 x URac 1.6 x URdc 70 C HQN-384-17/102 MKP378-MKPMKP378 prod spec Eng.doc
METALLIZED POLYPROPYLENE FILM BCcomponents Film Capacitors AC AND PULSE CAPACITOR
Doc. No: HQN-384-17/102 Rev. : W Iss. Date: 2006-10-16 Page 16 of 19
MKP 378 MKP/MKP378
MKP AND MKP/MKP RADIAL POTTED TYPE
Example C = 470 nF -630V used for S-correction. This is the signal shown in next figure. Up-p = 108V; Up = 170V; T1 = 12s; T2 = 64s; Ip-p = 5A The ambient temperature is 50 C Checking conditions: 1. The peak voltage Up = 170V is lower than 630 V (DC) 2. The peak-to-peak voltage 108V is lower than 22 x 300V (AC) = 850 Up-p 3. Ip = 2.5A is lower than 0.47 F x 370 V/s = 174 A 4. The dissipated power is 40 mW as calculated with Fourier terms and tdg maximum values This gives a temperature rise of 40 mW / 48 mW/C = 0.8 C This is allowed according figure max allowed component temp rise 5. Depends on actual application 6. Not applicable
Voltage signal:
296x12(full_width) I
Ipp
t
T1 T2
U
Upp
Up
t
CBA279
CBA279
HQN-384-17/102 MKP378-MKPMKP378 prod spec Eng.doc
METALLIZED POLYPROPYLENE FILM BCcomponents Film Capacitors AC AND PULSE CAPACITOR
Doc. No: HQN-384-17/102 Rev. : W Iss. Date: 2006-10-16 Page 17 of 19
MKP 378 MKP/MKP378
MKP AND MKP/MKP RADIAL POTTED TYPE
MARKING Product marking FRONT FACE The capacitors are marked by laser print on the top or head face (see figures) with the following information: 1. Rated capacitance code in accordance with "IEC 60062" 2. Tolerance on rated capacitance; J=5% 3. Rated (DC) voltage (e.g.1000 V) 4. Manufacturer's type designation (e.g.378) 5. Code for dielectric material (MKP /MKP) 6. Manufacturers name 7. Code for factory of origin: R: Roeselare 8. Year and week of manufacture (e.g. 0516) . HEAD OR FRONT FACE 15n J 630V 378 MKP/MKP R0602
Example of marking for a capacitor with pitch = 15 mm
100n J 1000V 378 MKP/MKP R0604
Example of marking for a capacitor with pitch = 22.5 mm.
HEAD FACE
4n7 J 2000V VISHAY 378 MKP/MKP R0516
Example of marking for a capacitor with pitch = 27.5 mm.
Package marking The package containing the capacitors is marked as shown
LINE 1 2 3 4 5 6 7 8 9 10 11 LB990160 Barcode label marking
MARKING EXPLANATION Manufacturer's name Country of origin Sub-family Type description Capacitance value, tolerance, voltage and Climatic category ("IEC 60068-1") Preference origin code: A Country of origin in code: 170 (Belgium) Responsible production centre: R Product type description Batch code Quantity and production period, year and week code Product code (12NC)
HQN-384-17/102 MKP378-MKPMKP378 prod spec Eng.doc
METALLIZED POLYPROPYLENE FILM BCcomponents Film Capacitors AC AND PULSE CAPACITOR
Doc. No: HQN-384-17/102 Rev. : W Iss. Date: 2006-10-16 Page 18 of 19
MKP 378 MKP/MKP378
MKP AND MKP/MKP RADIAL POTTED TYPE
QUICK REFERENCE TEST REQUIREMENTS TEST Robustness of leads Tensile and bending: "IEC 60068-2-21" Resistance to soldering heat: "IEC 60068-2-20" Component solvent resistance Solder bath: 260 C; 10 s Isopropyl alcohol; 23 C; 5 minutes No visible change Ligible marking C/C 1% tan 5 x 10-4 (C 100 nF) tan 10 x 10-4 (100 nF< C 470 nF) tan 15 x 10-4 (C> 470 nF) C/C 1% tan 5 x 10-4 (C 100 nF) tan 10 x 10-4 (100 nF< C 470 nF) tan 15 x 10-4 (C> 470 nF) C/C 1% (22.5/27.5 mm pitch) C/C 2% (15 mm pitch) tan 5 x 10-4 (C 100 nF) tan 10 x 10-4 (100 nF< C 470 nF) tan 15 x 10-4 (C> 470 nF) Rins 50% of specified value PROCEDURE (quick reference) REQUIREMENTS
Robustness of component Vibration: "IEC 60068-2-6" Shock: "IEC 60068-2-27" Climatic sequence Dry heat: "IEC 60068-2-2" Damp heat, cyclic, test Db, First cycle: "IEC 60068-2-30" Cold: "IEC 60068-2-1" Damp heat, cyclic, test Db, Remaining cycles: "IEC 60068-2-30" Other applicable tests Damp heat, steady state: "IEC 60068-2-3" 56 days; 40 C 90 to 95 % RH C/C 1% (22.5/27.5 mm pitch) C/C 2% (15 mm pitch) tan 5 x 10-4 (C 100 nF) tan 10 x 10-4 (100 nF< C 470 nF) tan 15 x 10-4 (C> 470 nF) Endurance (AC): "IEC 60384-17" 1000 hours; 85C 1.25 x URac (RMS); 50 Hz Rins 50% of specified value C/C 5% tan 5 x 10-4 (C 100 nF) tan 10 x 10-4 (100 nF< C 470 nF) tan 15 x 10-4 (C> 470 nF) Rins 50% of specified value C/C 1% (22.5/27.5 mm pitch) C/C 2% (15 mm pitch) tan 5 x 10-4 (C 100 nF) tan 10 x 10-4 (100 nF< C 470 nF) tan 15 x 10-4 (C> 470 nF) Resistance to soldering heat with preheating: "IEC 60384-17" Passive flammability "IEC 60384-1" Endurance (DC): "IEC 60384-17" Preheating: 85 C Solder bath: 260C; 10 s C/C 1% tan 5 x 10-4 (C 100 nF) tan 10 x 10-4 (100 nF< C 470 nF) tan 15 x 10-4 (C> 470 nF) No burning C/C 1% (22.5/27.5 mm pitch) C/C 2% (15 mm pitch) tan 5 x 10-4 (C 100 nF) tan 10 x 10-4 (100 nF< C 470 nF) tan 15 x 10-4 (C> 470 nF) Rins 50% of specified value 16 hours; 85 C 10 to 55 Hz; amplitude 0.75 mm or acceleration 98 m/s; 6 hours Half sinewave; 490 m/s; 11 ms
2 hours; -55 C
Heat storage: "IEC 60384-17"
2000 hours; 85 C
Class B 2000 hours; 85C 1.25 x URdc
HQN-384-17/102 MKP378-MKPMKP378 prod spec Eng.doc
METALLIZED POLYPROPYLENE FILM BCcomponents Film Capacitors AC AND PULSE CAPACITOR
Doc. No: HQN-384-17/102 Rev. : W Iss. Date: 2006-10-16 Page 19 of 19
MKP 378 MKP/MKP378
MKP AND MKP/MKP RADIAL POTTED TYPE
History (Publisher: Roeselare) Revision Description A First issue B New layout C P27 HQ2285K: change from taping method from one tape to two small tapes D Different corrections, add of reference testing E P36:sub-group ADD4: A4 body temp 85C iso 80C F P13: 2000V: cap range 0.016-0.051 AFD, add of mass G Lead diameter 0.8 0.08mm H Adj of ADD2 and ADD6; adj of 630 and 1000V pitch 15mm; new layout I Add of 2222 378 44...: MKP 250V -Lt=3.5 0.5mm; Add of 2222 378 54...: MKP 400V -Lt=3.5 0.5mm J New layout and renumbering tests (WV-HQ7012K); test "solvent resistance of marking" before "rapid change of temp" (WV-HQ6140K) K P8->19: adj of header MKP/MKP iso MKP378 L Pitch 27.5mm: taped on reel products no longer available (WV-HQ8060K); MKP lt=3.5 0.3mm iso lt=3.5 0.5mm; lt=3.2 0.5mm is cancelled (WV-HQ8092 and 6117K) M Adj of product marking and label (WV-HQ9128K); Philips becomes BC Components N Adj of package quantities; BC Beyschlag Centralab Components becomes BCcomponents (WVHQ0011K) O Case 1770-1785 becomes copper wire (WV-HQ0066K) P Add if there must be a voltage proof test after damp heat test (WV-HQ0198K); adj of delta C/C in ADD6 test (WV-HQ0240K) Q Replacement of AQL 0.65% by zero defect (WV-HQ0252K); pass flammability becomes class B iso C (WV-HQ01009K) R Corr passive flammability test S Adj of packing quantities for case 2560 (WV-HQ01132K) T Transition to Word, Vishay logo, code of origin R iso HQ (CP03168); inspection requirements in TPD191; Lead 0.6 mm iso 0.8 mm for cases 1750 and 1760 (CP-R04072);jedec symbols on label (CP-R04130), label completely Pb free products (CP-R04130 & CP-R05012); VISHAY iso Vishay on label (CP-R05052); add e3 symbol in text and add RoHS compliant (CP-R05053) U Corrections: Urdc iso Urac in tables, above capacitance values. V CO2->YAG 15mm and 22.5mm (CP R05164 & CP R06026); BFC2 code; change position batch code on label (CP R06080). P. 8: correction quantity loose in box for case size 1760 -> 1000 iso 1100. W Correction : Voltage for 250V and 400V products (CP R06130), correction weights (CP R06005); Wire not specified
Date 1992-02-25 1993-05-04 1993-08-24 1993-10-19 1994-01-11 1994-03-22 1994-04-19 1995-02-07 1996-02-06 1997-09-16 1998-03-17 1998-05-26 1999-12-07 2000-02-15 2000-05-09 2000-12-05 2001-10-23 2001-12-11 2003-02-18 2005-03-29
2005-12-20 2006-06-20 2006-10-16
HQN-384-17/102 MKP378-MKPMKP378 prod spec Eng.doc

▲Up To Search▲

Price & Availability of MKP37806

	To Download MKP37806 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .